Products  |  Thermodynamics, Heating and Sanitary Systems  |  Internal Combustion Engines  |  CT 159  |  CT 159.01
CT 159.01 Electronic Engine Indicating System for CT 159 Show data sheet (pdf file)
Technical Description

The system is used in conjunction with the transducer sets CT 159.03, CT 159.04 and the CT 159.05. Each of the sets consists of a pressure transducer and a TDC sensor. It allows pressure measurements to be carried out in the cylinder head of an internal combustion engine and is designed for the CT 150, CT 151, CT 152 and CT 153 engines. The data is transferred to a PC for further processing. The software produces p-t and p-V diagrams, and also displays the average pressure and the indicated power output.
The system consists of a measuring amplifier for the pressure transducer and TDC sensor, software and data acquisition card.

 
Learning Objectives / Experiments

- Familiarisation with and use of an electronic cylinder pressure
  indication system
- p-t diagram (top left)
- p-V diagram (bottom)
- Pressure curve for gas cycle (top right)
- Determination of indicated power output from p-V diagram
Features

* Cylinder pressure indication system, suitable for

  CT 150 - CT 153 test engines
Available accessories
CT 159.03 -- Pressure Transducer and TDC Sensor for CT 150 / CT 152
CT 159.04 -- Pressure Transducer and TDC Sensor for CT 151
CT 159.05 -- Pressure Transducer and TDC Sensor for CT 153
Alternative products
CT 100.13 -- Electronic Engine Indicating System for CT 110
CT 400.09 -- Electronic Engine Indicating System for CT 400
Specification

[1] Cylinder pressure indication system for internal combustion engine
[2] Only to be used in conjunction with CT 159.03, CT 159.04 or CT 159.05 transducers
[3] Chronological representation of pressure curve against the crank angle in p-t diagram to determine the maximum pressure and to monitor the ignition point and the pressure increase
[4] Representation of pressure curve against the standardised piston capacity in p-V diagram to determine the indicated power output
[5] System consists of measuring amplifier, data acquisition card and software for Windows XP

 
Technical Data

Measuring amplifier: amplification factor 10mbar/mV
TDC sensor trigger distance: 1mm
Dimensions and Weight
l x w x h amplifier: 270 x 250 x 100 mm
Weight : approx. 4 kg
Connections
230V, 50/60Hz, 1 phase or 120V, 50/60Hz, 1 phase or 120V, CSA, 1 phase
Scope of Delivery
1 measuring amplifier
1 data acquisition card with software
1 instruction manual
Order Details
063.15901  CT 159.01  Electronic Engine 
                    Indicating System for CT 159
© 2005 G.U.N.T. Gerätebau GmbH