Products  |  Thermodynamics, Heating and Sanitary Systems  |  Applied Thermodynamics  |  WL 314  |  WL 314.02
WL 314.02 Mixed Flow Module Show data sheet (pdf file)
Technical Description
The air duct with the pipe bundle heat exchanger is fitted to WL 314 and heated electrically. The heat transfer between the pipe wall and medium can be studied. Baffles guide the air through the pipe bundle in a cross-flow. The number of deflections can be varied by removing and adding baffles. The power and surface temperature at the heater are measured and displayed on the base unit WL 314.
Learning Objectives / Experiments
- Relationships between Nusselt, Reynolds and Prandtl
- Characteristics of a pipe bundle heat exchangers
- Pressure loss across the entire measured section
- Determination of heat transfer coefficients
Features
* Completely pre-assembled study unit with heater
Specification
[1] Accessory for WL 314, mixed flow module
[2] Pipe bundle: 1 heater, 18 empty pipes
[3] Heater placed in the centre of the pipe bundle
[4] Rod-type heater 250W
[5] Up to 8 baffles can be added
[6] Thermocouple type K: temperature measurement on the heater sleeve surface
[7] Mounted in WL 314 with quick-action fasteners
Technical Data
Rod-type heater power: 250W
Pipe diameter: 100mm
Supply via WL 314
Dimensions and Weight
l x w x h : 1050 x 200 x 280 mm
Weight : approx. 15 kg
Scope of Delivery
1 unit with heater, 1 instruction manual
Order Details
060.31402  WL 314.02  Mixed Flow Module
© 2005 G.U.N.T. Gerätebau GmbH