G.U.N.T. - Equipment for engineering education

Products | Thermodynamics, Heating and Sanitary Systems | Internal Combustion Engines | CT 110 | CT 100.22

CT 100.22

Four-Stroke Diesel Engine for CT 110

Technical Description

The air-cooled four-stroke diesel engine with direct injection is securely mounted on a base plate. This unit is fitted in the CT 110 test stand and bolted into place. Guides are provided to allow easy and precise alignment of the engine. It is connected to the brake unit using an elastic claw coupling. The engine is set up so that the intake pressure can be measured. It also contains a sensor to measure the exhaust gas temperature, which is connected to the CT 110 control cabinet. The fuel supply hose has a self-sealing quick-release coupling.

Learning Objectives / Experiments

In conjunction with CT 110 test stand
- Familiarisation with a four-stroke diesel engine
- Plotting of torque and power curves
- Determination of specific fuel consumption
- Determination of volumetric efficiency
- Determination of excess air factor
- Determination of engine friction loss

Features

* Test engine for use in CT 110 test stand

Available accessories

CT 100.13 -- Electronic Engine Indicating System for CT 110
CT 100.16 -- Pressure Transducer for CT 100.22

Specification

[1] Air-cooled single cylinder diesel engine for installation in CT 110 test stand
[2] Engine mounted on a base plate
[3] Power transmission to brake unit via claw coupling
[4] Engine completely equipped with fuel hose and an exhaust gas temperature sensor

[5] Fuel hose with self-sealing quick-release coupling

Technical Data

Air-cooled single cylinder diesel engine with direct injection
- power output: 5.5kW at 3500 rpm
- compression ratio 22:1
- bore: 80mm
- stroke: 69mm

Dimensions and Weight

l x w x h : 370 x 335 x 450 mm
Weight : approx. 35 kg

Scope of Delivery

1 engine, complete with all connections and supply lines

1 instruction manual

Order Details

063.10022 CT 100.22 Four-Stroke Diesel Engine

for CT 110