Products  |  Thermodynamics, Heating and Sanitary Systems  |  Sanitary Systems  |  HL 900  |  HL 900.53
HL 900.53 Accessory Set Thermal Expansion Show data sheet (pdf file)
Technical Description
The accessory set consists of 2 pipe sections that can be individually selected using ball valves. The selection of different pipe materials allows to examine thermal expansion depending on temperature and also material. The pipe sections are attached to the panel with a fixed and a movable bearing, so that the change in length on the free end can be determined with dial gauges. The panel can easily be attached to the base unit HL 900 with turn-lock fasteners. A hot water connection and drain are required for operation. The accessory set should be set up horizontally in order to avoid the influence of gravity on results.
Learning Objectives / Experiments
· Determination of length changes at different temperatures
· Length changes with different materials
Features
Experimental set-up for the examination of the thermal expansion of pipes
Alternative products
HL 101 -- Thermal Expansion Training Panel
Specification
[1] Experimental set-up to study the thermal expansion of pipes
[2] 2 different measured sections, 500mm each
[3] Copper pipe section, D=22x1mm
[4] Steel pipe section, ½", galvanized
[5] 2 dial gauges 10mm, graduated 1/100mm
[6] Panel made of AlMg3, 1048x298x4mm
Technical Data
Measured length of each pipe: 500mm
Copper pipe: D=22x1mm
Steel pipe: ½", galvanized
Dial gauge: 10mm, graduated 1/100mm
Quick-action hose couplings ½" (GEKA couplings)
Dimensions and Weight
l x w x h : 1048 x 298 x 60mm
Weight : approx. 6 kg
Scope of Delivery
1 accessory set
Order Details
065.90053 HL 900.53 Accessory Set Thermal Expansion
© 2005 G.U.N.T. Gerätebau GmbH