Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.08
HM 150.08 Impact of Jet Apparatus Show data sheet (pdf file)
Technical Description
The unit comprises a plexiglas tank in which a water jet discharged from a nozzle hits a surface and is deflected. 4 different test shapes with the following deflection angles are included: plate 90°, hemisphere 180°, angled plate 45!, cone 135°. The impact forces at the deflector are measured using scales loaded with weights.
The water supply is provided either from the laboratory mains or using the HM 150 (closed water circuit).
Learning Objectives / Experiments
A hemisphere, a cone, an angled and a flat plate are provided as deflector:
Impulse-momentum; direct measurement of impact forces
Effect of flow rate and velocity
Effect of various deflection angles
Features
Impact forces on different deflectors
Demonstration of principle of linear momentum
Specification
[1] Cylindrical operating area made of Plexiglas, diameter 200mm, height 340mm
[2] Measurement of jet impact forces with weights
[3] 4 interchangeable deflectors
[4] Unit mounted on base plate,
lxwxh 400x400x40mm, powder-coated steel plate
Technical Data
Operating range d: 200mm, height: 340mm
Nozzle d: 10mm
Deflecting angle of different deflectors:
plate: 90°, hemisphere: 180°,
angled plate: 45°/135°, cone: 135°
Dimensions and Weight
l x w x h : 400 x 400 x 880 mm
Weight : approx. 23 kg
Scope of Delivery
1 experimental set-up, 1 set of weights, 4 deflectors, 1 instruction manual
Order Details
070.15008 HM 150.08 Impact of Jet Apparatus
© 2005 G.U.N.T. Gerätebau GmbH