Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.11
HM 150.11 Fluid Friction Apparatus Show data sheet (pdf file)
Technical Description
The panel comprises a pipe network with sub-sections that can be isolated individually and one measurement section in which different elements can be inserted. There are 4 water manometers for pressure measurements. The pipe network is made of plastic. Annular chambers enable pressures to be measured with minimum interaction.
The water supply and flow rate measurements are provided by the HM 150. Alternatively, the arrangement can also be operated from the laboratory mains supply.
Learning Objectives / Experiments
· Pressure loss in pipes and fittings
· Effect of flow velocity on the pressure loss
· Opening characteristics for shut-off devices
· Determination of loss coefficients
· Different flow rate measurement methods
· Comparison of calculation and experiment
Features
Pressure loss in a pipe system
Disturbance-free pressure measurement via annular chambers
Alternative products
HM 110 -- Hydrodynamics Trainer
HM 111 -- Pipe Network Bench
HM 150.29 -- Losses in Bends and Fittings
Specification
[1] Set-up to study the pressure loss in pipes and fittings through which a liquid is flowing, for use with HM 150
[2] l x w x h 1530x640x1200mm, 48kg
[3] Pipes and pipe connections made of PVC
[4] 2 liquid-level manometers 0...100mbar
[5] Transparent measurement objects nozzle/orifice and venturi tube
Technical Data
Measuring section 800mm, 20x1.5, PVC
Pipe sections made of PVC: continuously narrowing, 32x1.8-20x1.5; continuously widening, 20x1.5-32x1.8; with 90° elbow / bend, 20x1.5
Measuring range of manometer 0...0.1bar
Dimensions and Weight
l x w x h : 1530 x 640 x 1200 mm
Weight : approx. 48 kg
Scope of Delivery
1 arrangement, 1 set of measuring objects, 1 instruction manual
Order Details
070.15011 HM 150.11 Fluid Friction Apparatus
© 2005 G.U.N.T. Gerätebau GmbH