Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.10
HM 150.10 Flow Visualisation Apparatus Show data sheet (pdf file)
Technical Description
During the experiments on various drag bodies, ink is injected through fine nozzles into a horizontal flow chamber. The chamber is covered with a glass panel so that the streamlines can be clearly observed. Flow sources and sinks can be simulated using 4 additional holes in the chamber. The distribution and amount of ink injected can be adjusted with manual valves.
The water supply is provided either from the laboratory mains or using the HM 150 (closed water circuit).
Learning Objectives / Experiments
· Depiction of streamlines in the flow around bodies
· Effect of bodies of different shape on the flow
· Effect of sources and sinks
Features
Visualisation of streamline patterns
Alternative products
HM 152 -- Flow Visualisation Table
Specification
[1] Unit to visualise flow lines, for use with the HM 150
[2] l x w x h 640x520x485mm, 17kg
[3] Water as flowing medium, injection of ink in a flow chamber
[4] 8 different drag bodies
[5] Simulation of flow sources and flow sinks possible
Technical Data
Contrast medium: ink, injection via 15 nozzles
Ink tank capacity: 200ml
4 sources or sinks
Dimensions and Weight
l x w x h : 640 x 520 x 485 mm
Weight : approx. 17 kg
Scope of Delivery
1 unit, 1 set of drag bodies, 2 bottles of ink 30ml, 1 instruction manual
Order Details
070.15010 HM 150.10 Flow Visualisation Apparatus
© 2005 G.U.N.T. Gerätebau GmbH