Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.21
HM 150.21 Flow Channel Show data sheet (pdf file)
Technical Description
The unit is used to demonstrate flow over weirs and the streamlines around different drag models. A flow straightener at the inlet ensures low turbulence flow. Ink is injected into the flowing water using fine nozzles to visualise the flow patterns around the various models. 6 easy to interchange weirs and drag bodies can be placed in the channel. The height of the water in the channel can be regulated by adjusting the outlet orifice.
The water supply is provided either from the laboratory mains or using the HM 150 (closed water circuit).
Learning Objectives / Experiments
· Effect of different shaped weirs on the flow
· Streamlines around various bodies
Features
Flow around various bodies
Alternative products
HM 160 -- Multi-Purpose Teaching Flume
HM 164 -- Flume for Open and Closed Flow
HM 241 -- Principles of Hydraulics
Specification
[1] Miniature flow channel for operation on the HM 150
[2] l x b x h 900x640x800mm, approx. 35kg
[3] Working area l x w x h 625x20x150mm, made of transparent material
[4] 6 different bodies and weirs
[5] Ink contrast producing medium, 7 nozzles
Technical Data
Bodies: small cylinder, large cylinder, streamlined body, wing section, sharp edged weir, wide crested weir
Capacity of the feed tank: 12.5ltr
Dimensions and Weight
l x w x h : l x w x h : 900 x 640 x 800 mm
Weight : approx. 35 kg
Scope of Delivery
1 flow channel, 6 bodies, 1ltr ink, 1 set of tools, 1 instruction manual
Order Details
070.15021 HM 150.21 Flow Channel
© 2005 G.U.N.T. Gerätebau GmbH