Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.36
HM 150.36 Pitot-Static Tube Apparatus Show data sheet (pdf file)
Technical Description
It is possible to move the Pitot-static tube across the entire cross-section of the pipe and thus measure the pressure profile. The position of the measuring tip relative to the bottom of the pipe can be read on a scale. The Pitot-static tube can be connected to any differential pressure manometer using hose connections. Differential pressures up to approx. 50mbar are possible when using the pump of the HM 150.
The water supply is provided either from the laboratory mains or using the HM 150 (closed water circuit).
Learning Objectives / Experiments
· Velocity profile in a pipe flow
· Demonstration that the flow velocity is proportional to the pressure difference between the total pressure and the static pressure
Features
Static and dynamic pressure measurement
Determination of flow velocity profiles in a pipe
Specification
[1] Pitot-static tube, can be used with HM 150
[2] l x w x h 850x640x400mm, 4kg
[3] Pitot-static tube with scale to determine the position within the pipe diameter
[4] Hose connections: measurement section DN 20, Pitot-static tube 4mm
Technical Data
Pipe section made of transparent PVC: diameter: 32x2.4mm, length: approx. 800mm
Pitot-static tube:
- hose connection: 4mm
- head diameter: 2.3mm
Dimensions and Weight
l x w x h : 850 x 640 x 400 mm
Weight : approx. 4 kg
Scope of Delivery
1 apparatus, 1 set of hoses, 1 instruction manual
Order Details
070.15036 HM 150.36 Pitot-Static Tube
© 2005 G.U.N.T. Gerätebau GmbH