Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.35
HM 150.35 Horizontal Osborne Reynolds Demonstrator Show data sheet (pdf file)
Technical Description
The experimental pipe section in this unit is horizontal, in contrast to the vertical pipe in the HM 150.18. The horizontal arrangement enables the ink injection to be controlled more easily. The flow rate in the experimental pipe section can be adjusted with a manual valve. A raised tank with overflow ensures a constant inlet pressure and flow rate. The clear formation of the streamlines enables the transition from laminar to turbulent flow to be observed. The critical Reynolds number is determined by measuring the flow velocity when this transition occurs.
The water supply is provided either from the laboratory mains or using the HM 150 (closed water circuit).
Learning Objectives / Experiments
· Depiction of laminar flow
· Depiction of the transition area
· Depiction of turbulent flow
Features
Laminar and turbulent flow in a horizontal pipe
Alternative products
HM 150.18 -- Osborne Reynolds Demonstrator
Specification
[1] Module to carry out the Osborne Reynolds experiment, to be used with the HM 150
[2] l x w x h 1070x640x720mm, 25kg
[3] Horizontal experiment section made of glass
[4] Tank to generate a constant initial pressure
Technical Data
Supply tank: approx. 2.8ltr
Experimental tube:
Inner diameter: 16mm
Length: 700mm
Ink tank: 270ml
Dimensions and Weight
l x w x h : 1070 x 640 x 720 mm
Weight : approx. 25 kg
Scope of Delivery
1 apparatus, 1 set of hoses, 1 bottle of ink, 1 instruction manual
Order Details
070.150.35 HM 150.35 Horizontal Osborne Reynolds Demonstrator
© 2005 G.U.N.T. Gerätebau GmbH