Products  |  Process Control and Process Engineering  |  Chemical Process Engineering  |  CE 310  |  CE 310.10
CE 310.10 PC Data Acquisition System Show data sheet (pdf file)
Technical Description
This data acquisition system enables the measured signals from the CE 310 to be evaluated on a PC. The conductivity of the reaction product and its actual temperature at the outlet of the respective reactor can be displayed and recorded over time. In addition, the pump rates of the two chemical pumps are taken. The display module permits the display or hiding of the individual measured parameter curves as requested; it is also possible to change the scaling of the diagrams. Measured results can also be printed out and saved. WINDOWS NT or later is required for the operating system. A PC is not included.
Learning Objectives / Experiments
· Continuous acquisition, display and recording of the relevant measured values during experiments on the CE 310 Chemical Reactors Trainer in connection with accessories CE 310.01, .02, .03, .04
- Conductivity of the reaction product
- Temperature of the reaction product
- Pump rates of the two pumps
Features
Continuous acquisition, display and saving of conductivity, reaction temperature and pump rate
Specification
[1] PC data acquisition of measured data for CE 310 with PC data acquisition card and LabView software
[2] Continuous measurement, display and recording of conductivity, reactant temperature and pump rates
Technical Data
Software-Basis: LabView
System requirements: PC with Pentium III 600MHz, Windows NT/2000/XP, 128MB RAM, 100MB free hard disc space, PCI slot, graphics card 1024x768 pixels, true color
Scope of Delivery
1 data acquisition software, 1 PC data acquisition card, 1 installation manual
Order Details
083.31010 CE 310.10 PC Data Acquisition System
© 2005 G.U.N.T. Gerätebau GmbH