Products  |  Thermodynamics, Heating and Sanitary Systems  |  Applied Thermodynamics  |  WL 110  |  WL 110.03
WL 110.03 Shell & Tube Heat Exchanger Show data sheet (pdf file)
Technical Description
The heat exchanger is connected to the WL 110 service unit using quick-action hose couplings and secured with star grip screws. The temperature sensors for measuring the feed and return temperature are on the supply connections on the WL 110. The shell of the heat exchanger is made of transparent plastic so that the tubes are fully visible. Shell and tube heat exchangers are typical industrial heat exchangers and are manufactured up to very large sizes.
Learning Objectives / Experiments
· Function and operating behaviour of a shell & tube heat exchanger (cross-flow heat exchanger)
· Temperature curve in parallel flow operation
· Temperature curve in counterflow operation
· Comparison with other types of heat exchanger
Features
Shell & tube heat exchanger for connecting to the WL 110 Service Unit
Specification
[1] Heat exchanger for connecting to the WL 110 Service Unit
[2] Connection using quick-action hose couplings
[3] Transparent shell, tube bundle visible
[4] Tube bundle consisting of 7 tubes and 4 baffle plates
[5] System diagram for parallel and counterflow
Technical Data
Heat exchanger area: 20000mm˛
Dimensions and Weight
l x w x h : 400 x 230 x 110 mm
Weight : approx. 7 kg
Scope of Delivery
1 heat exchanger, 1 manual
Order Details
060.11003 WL 110.03 Shell & Tube Heat Exchanger
© 2005 G.U.N.T. Gerätebau GmbH