Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.09
SE 110.09 Experimental Set Deflection of Beams Show data sheet (pdf file)
Technical Description
In conjunction with the two universal test frames SE 110/SE 111, this set enables experiments to be performed on bending beams on two bearings under a point load. The deflection can be measured as a function of the beam geometry, beam material and load. The experiment can also be used to check the reciprocity theory, the principle of superposition, and to determine the modulus of elasticity. For this purpose, three steel beams of varying cross-section, and a brass and an aluminium beam are included with the set. The beam is loaded using sets of weights. Two position measurement gauges are used to measure the deformation.
Learning Objectives / Experiments
Deflection as function of the amount of load
Deflection as a function of the shape of the cross-section of the beam
Influence of the span of the beam on deflection
Determination of the modulus of elasticity of various beam materials
Determination of the elastic line
Checking of the theorem of reciprocity
Checking of the principle of superposition
Features
Elastic deformation of a bending beam on two bearings under the influence of a point load
Alternative products
EM 100 -- Educational Apparatus Bending and Torsion
SE 110.14 -- Experimental Set Continuous Beam
SE 120 -- Structure Demonstration Model, Set of 7 Experiments
WP 100 -- Apparatus for Testing Torsion and Deflection
WP 950 -- Beam Apparatus
Specification
[1] Supplementary experiment for the SE 110/SE 111 table-top system, beam deflection under a point load
[2] Beam materials steel, brass and aluminium
[3] Length 1000mm, cross-section 20x3/4/6mm
[4] Dial gauges 0...20mm, resolution 0.01mm
[5] Ball bearing mounted bearings, bearing width 20mm
[6] Loading using sets of weights
Technical Data
Beam material : steel, brass, aluminium
Length: 1000mm, cross-section: 20x3/4/6mm
Weight sets: 12x1N and 9x5N
Dial gauges : 0...20mm, resolution 0.01mm
Ball bearing mounted bearings, width: 20mm
Dimensions and Weight
Weight : approx. 16 kg
Scope of Delivery
5 test beams, 2 supports, 1 set of weights, 2 dial gauges, 1 instruction manual
Order Details
022.11009 SE 110.09 Experimental Set Deflection of Beams
© 2005 G.U.N.T. Gerätebau GmbH