Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.54
SE 110.54 Experimental Set Equilibrium of a Beam Show data sheet (pdf file)
Technical Description
The reaction forces on the beam on two supports and on a lever can be measured with the aid of this experimental set. The set is intended for use with the SE 110/SE 111 universal testing frames. The beam is made of rectangular aluminium profile and is therefore of only very low own weight. Various experimental set-ups can be investigated due to sliding bearings and weights that can be hung where required. Force dial gauges measure the reaction forces, a spring balance measures the force on one side of the lever. Bearing separations are defined using the ruler on the beam.
Learning Objectives / Experiments
· Beam on two supports
· Lever
Features
Reaction forces on the beam on two supports, or one lever
Available accessories
SE 110.61 -- Software Program L1 Structural Mechanics
Alternative products
EM 043 -- Reaction of Beams Apparatus
EM 044 -- Forces on a Beam Apparatus
EM 049 -- Simple Moments Apparatus
SE 110.52 -- Experimental Set Equilibrium of Parallel Forces
Specification
[1] Supplementary set for the SE 110/SE 111 universal test frames, reaction forces on a beam
[2] Aluminium beam, rectangular profile
[3] Beam length 1000mm, weight 7N
[4] Force dial gauges 0...40N, graduations 5N
[5] Spring balance 0...50N, graduations 0.5N
[6] Integrated ruler on the beam
[7] Weight set up to 60.3N
Technical Data
Beam length: 1000mm
Beam own weight: 7N
Dynamometer: 0...40N, graduations: 5N
Spring balance: 0...50N, graduations: 0.5N
Set of weights: up to 60.3N
Dimensions and Weight
Weight : approx. 15 kg
Scope of Delivery
1 experimental set, complete
1 instruction manual
Order Details
022.11054 SE 110.54 Experimental Set Equilibrium of a Beam
© 2005 G.U.N.T. Gerätebau GmbH