Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.45
SE 110.45 Experimental Set Area Moment Method Show data sheet (pdf file)
Technical Description
Using this experimental set, available as a supplement to the SE 110 or SE 111 universal test frames, the application of the area moment method for the determination of the max. deflection and max. inclination of a beam can be clearly demonstrated. The set contains a beam with a rectangular cross-section that can be clamped at either end as required. This beam can be loaded with forces or moments at different points as required using weights on cords. In this way a wide range of different load cases can be investigated. The deformation of the beam is measured using mechanical dial gauges. All parts are of robust construction, the experimental set is thus suitable for student experiments.
Learning Objectives / Experiments
· Loading experiment with beam on two supports
· Measurement of the deflection
Features
Rectangular beam, can be clamped at both ends
Force and moment application at any position
Available accessories
SE 110.62 -- Software Program L2 Structural Mechanics
Alternative products
SE 110.47 -- Experimental Set Virtual Work
Specification
[1] Supplementary set for the SE 110 table system, application of the area moment method
[2] Beam made of steel, rectangular cross-section
[3] Length 1000mm, cross-section 20x4mm
[4] Pos. Meas. range 0..20mm, graduations 0.01mm
[5] Bearing supports can be slid and clamped
[6] Dial gauge for measurement of inclination
[7] Weight sets 3x40N
Technical Data
Beam length: 1000mm
Beam cross-section: 20x4mm
Beam material: steel
Pos. Meas. range: 0...20mm, graduations: 0.01mm
Weight sets: 3x40N
Dimensions and Weight
Weight : approx. 22 kg
Scope of Delivery
1 experimental set, complete, 1 instruction manual
Order Details
022.11045 SE 110.45 Experimental Set Area Moment Method
© 2005 G.U.N.T. Gerätebau GmbH