G.U.N.T. - Equipment for engineering education

Products | Mechatronics | Machinery Diagnosis | PT 500 | PT 500.05

PT 500.05

Brake & Load Unit

Technical Description

Many vibration phenomena can only be achieved when the system is under load. The brake and load unit is used to generate vibration as a function of torque, e.g. in toothed gearing mechanisms or electric motors. It consists of a magnetic particle brake and an electric control unit. The braking torque can be finely adjusted on the control unit. The exciter current is applied as a measure of the braking torque and is indicated digitally on a display. An integrated belt drive, with a free shaft, provides the brake with two torque and speed ranges. The energy is converted by the brake into heat and discharged to the ambient air by a fan.
The brake can be quickly and precisely mounted on the slotted plate of the PT 500 base unit.

PT 500.05 is used with the following accessory sets:
PT 500.13 Couplings
PT 500.14 Belt drive
PT 500.15 Gear damage
PT 500.19 Electromechanical vibrations

Features

* Generation of a loading torque₁
* Two speed and torque ranges₁
* Vented magnetic particle brake with control unit

Specification

[1] Brake and load unit for the machinery diagnostic training system
[2] Magnetic particle brake
[3] Control unit with exciter current display
[4] Potentiometer to adjust braking torque
[5] Integrated belt drive for second speed and torque range
[6] Temperature protection and fan overheating protection
[7] 85...264V, 47...63Hz, 1 phase

Technical Data

Continuous braking power: approx. 450W/3000rpm

Transmission ratio between brake shafts: i=3

Direct brake operation:
- speed range: 200...2000rpm
- braking torque: 1...10Nm

Operation via belt drive:
- speed range: 600...6000rpm
- braking torque: 0.3...3.3Nm

Dimensions and Weight

l x w x h : 475 x 415 x 195 mm (control unit)
l x w x h : 350 x 170 x 260 mm (brake)
Weight : approx. 15 kg

Connections

85...264V, 47...63Hz, 1 phase

Scope of Delivery

1 magnetic particle brake
1 control unit
1 instruction manual

Order Details

052.50005 PT 500.05 Brake & Load Unit