Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.56
SE 110.56 Experimental Set Modulus of Elasticity Show data sheet (pdf file)
Technical Description
This experimental set is intended for use with the SE 110/SE 111 universal testing frames. It is used for determining the modulus of elasticity of materials. The set of parts also contains test bars made of different materials with varying diameters. With the aid of a ring dynamometer, the test bars are loaded with a force in the longitudinal direction. The elongation that occurs between two measuring points on the bar during this process is measured using two dial gauges. The measuring plates can be fitted such that measurement error due additional bending moment is to a large extent excluded.
Learning Objectives / Experiments
· Determination of the modulus of elasticity
- Different materials
- Different specimen cross-sections
Features
Determination of the modulus of elasticity of different materials
Loading of bars with the aid of a ring dynamometer
Alternative products
EM 051 -- Extension of Wires Apparatus
Specification
[1] Supplementary set for the SE 110/SE 111 universal test frames, determination of the modulus of elasticity
[2] Six test bars, bar material steel 235N/mm˛, brass 180N/mm˛, aluminium 110N/mm˛
[3] Bar length 600mm
[4] Bar diameter 3mm and 6mm
[5] Load max. 5kN
[6] Two mech. elongation dial gauges
Technical Data
Test bar length: 600mm
Bar diameter : 3mm, 6mm
Bar material: steel 235N/mm˛, brass 180N/mm˛, aluminium 110N/mm˛
Load: max. 5kN
Dimensions and Weight
Weight : approx. 10 kg
Scope of Delivery
6 test bars, 1 loading device, 2 dial gauges, 1 instruction manual
Order Details
022.11056 SE 110.56 Experimental Set Modulus of Elasticity
© 2005 G.U.N.T. Gerätebau GmbH