Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 152
HM 152 Flow Visualisation Table Show data sheet (pdf file) Print page
Technical Description
On the HM 152 unit, the behaviour of two dimensional flows can be investigated. In this case the water flows through a flat, horizontal flow chamber. The chamber is covered with a glass panel, this enables the flow lines to optimally observed. The flow around bodies is made visible by coloured flow lines. Different drag bodies, e.g. cylinder, a nozzle contour or a wing section are included with the unit. The flow lines are coloured by injecting ink. Using 8 additional holes in the chamber, flow sources and sinks can be simulated, in this way the analogy to potential field theory is demonstrated. The water flow rate and the amount of ink injected can be adjusted using regulator valves. The sources and sinks are also activated using valves. Only a supply of water and a drain are required for operation of the unit.
Learning Objectives / Experiments
· Definition of flow and path lines in fluid mechanics
· Depiction of flow lines when flowing around bodies
· Influence of different shaped bodies on the flow
· Investigation of the influences of sources and sinks on the flow lines
Features
Closed experimental set-up for the depiction of flow lines
Easy to use floor standing unit
Alternative products
HM 150.10 -- Flow Visualisation Apparatus
Specification
[1] Floor standing unit for the depiction of flow processes
[2] Operation with water, ink contrast producing medium
[3] Drag bodies are included
[4] Flow chamber with glass cover
[5] Generation of different flows, simulation of sources and sinks
[6] Adjustment of flow speed and ink metering using valves
Technical Data
Contrast producing medium: ink
Ink tank capacity:
200ml
Flow chamber area 890x400mm
Flow chamber height 130mm
Dimensions and Weight
l x w x h: 1400 x 810 x 1310 mm
Weight: approx. 140 kg
Connections
Cold water connection 300ltr/h
Scope of Delivery
1 floor standing unit, 1 set of drag bodies, 1 bottle of ink, 1 instruction manual
Order Details
070.15200 HM 152 Flow Visualisation Table
Print
© 2005 G.U.N.T. Gerätebau GmbH