Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
> Basic Control Systems
> Components and Calibration
> Process Control Modules
> Process Control Trainers
> Industrial Process Control Systems
> Process Control with PLC Applications
> Automatic Control for Plant and Machinery
> Fuzzy Control
> Mechanical Process Engineering
> Chemical Process Engineering
> Thermal Process Engineering
> Process Plants
Overviews
Products  |  Process Control and Process Engineering  |  Components and Calibration  |  RT 310
RT 310 Calibration Station Show data sheet (pdf file) Print page
Technical Description
This calibration station is used to measure the transient response and to calibrate electrical and pneumatic actuators for control systems. It is also possible to check measurement chains. For this purpose the station is equipped with highly precise sensors and measurement methods. Specifically, these are a precise pressure sensor, a precise current sensor, a universal calibrator and two pressure transducers with digital displays. In addition, a two-channel chart recorder is included. The measuring objects available as accessories are fitted to a 450mm experimental measuring panel and are thus easy to interchange.
Learning Objectives / Experiments
· High precision pressure measurement
· Current measurements on standardised current signals
· Output of defined test pressures and test current signals
· Stat. transient response of actuators, controllers, measuring transducers
Features
Measurement of transient response and calibration of actuators used in control systems by precise measurement methods
Alternative products
RT 304 -- Calibration Bench
RT 390 -- Test Stand for Control Valves
Specification
[1] Measuring station to investigate the function and transient response of electrical and pneumatic control loop components and their calibration
[2] Measuring objects on modular 450mm experimental panel system
[3] Precision pressure sensor, precision current sensor
[4] Two-channel chart recorder 0...20mA
[5] 230V, ~50Hz, compressed air 6...8bar
Technical Data
Pressure transducers: 0...250mbar and 0...6bar, output 4...20mA, 4 1/2 digit digital display
Current signal sensor 0...20mA, resolution 0.03mA
Two-channel chart recorder: 0...20mA
230V, ~50Hz, compressed air 6...8bar
Dimensions and Weight
l x w x h : 1520 x 750 x 1500 mm
Weight : approx. 130 kg
Scope of Delivery
1 calibration station, complete
1 instruction manual
Order Details
080.31000 RT 310 Calibration Station
Print
© 2005 G.U.N.T. Gerätebau GmbH