Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
> Basic Control Systems
> Components and Calibration
> Process Control Modules
> Process Control Trainers
> Industrial Process Control Systems
> Process Control with PLC Applications
> Automatic Control for Plant and Machinery
> Fuzzy Control
> Mechanical Process Engineering
> Chemical Process Engineering
> Thermal Process Engineering
> Process Plants
Overviews
Products  |  Process Control and Process Engineering  |  Chemical Process Engineering  |  RT 586
RT 586 Analytical Process Control System Show data sheet (pdf file) Print page
Technical Description
The RT 586 Analytical Process Control System demonstrates the control of the quality of industrial process water and waste water. It combines chemical procedures with applied basic principles of control engineering.
The mobile laboratory unit is dimensioned in a way to allow experiments, without neglecting the characteristics of industrial plants. Neutral water is mixed with diluted sodium hydroxide, the resulting ion load is measured. The addition of diluted sulphuric acid neutralises the solution. Controlled aeration changes the oxygen content. Another experiment controls the redox potential of water using a diluted iodine solution. All processes are equipped with extensive instrumentation and are controlled by industrial controllers. Transparent reaction tanks enable the processes to be observed.
Learning Objectives / Experiments
· Simulation of a salt load in water by addition of diluted sodium hydroxide via a conductivity control system
· pH-value control of the solution using diluted sulphuric acid
· Change in the oxygen content by means of controlled aeration with compressed air
· Control of the redox potential via addition of diluted iodine solution
Features
Monitoring and control of quality of industrial waste water
High quality chemical instrumentation in accordance with industrial standards
Four completely independent control loops
Use of industrial metering pumps
Alternative products
CE 300 -- Ion Exchange Demonstration Unit
RT 552 -- pH-Value Control Trainer
Specification
[1] Analytical process control system to monitor and modify industrial waste water
[2] High quality instrumentation and control equipment for conductivity measurement, pH-value control, oxygen enriching, redox potential control
[3] pH-value single rod measuring sensor 0...12pH
[4] Oxygen sensor 0...60mg/ltr O2
[5] Industrial redox measuring electrode 0...1000mV
[6] Microprocessor-controller universal controller
[7] 6-channel recorder
[8] Transparent reaction tanks
[9] Compressed air supply 3...8bar
[10] 230V, ~50Hz
[11] Sturdy steel tube frame with castors
Technical Data
Chemicals: sodium hydroxide NaOH 2%,
sulphuric acid H2SO4 2%
Iodine solution: ratio H2O : J 100:1
Metering pumps: max. 1.7ltr/h
pH single rod measuring sensor: 1...12pH
Conductivity sensor with integrated PT100
temperature sensor: 0.01...20mS/m
Oxygen sensor: 0...60mg/ltr O2
Redox measuring electrode: 0...1000mV
Universal controller, microprocessor-based
Multiple channel recorder: 6 channels
Dimensions and Weight
l x w x h : 1800 x 700 x 1850 mm
Weight : approx. 150 kg
Connections
230V, ~50Hz
Compressed air: 3...8bar
Scope of Delivery
1 process control system, complete
1 instruction manual
Order Details
080.58600 RT 586 Analytical Process Control System
Print
© 2005 G.U.N.T. Gerätebau GmbH