Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Flow in Pipes  |  HM 500  |  HM 500.05
HM 500.05 Ultrasonic Flowmeter Show data sheet (pdf file) Print page
Technical Description
The Ultrasonic Flowmeter exploits the principle of propagation time measurement; here a measured section is created in a flowing medium, in this section an alternating signal is sent and received between 2 sensors. From the time difference between the respective propagation times, which are measured using very precise electronics, the flow speed and, if the cross-section is known, the flow rate can be measured. Temperature sensors can be connected to the unit; if these are used, the user can measure the thermal losses in a flowing fluid using the same principle.
Learning Objectives / Experiments
· Familiarisation with an ultrasonic flowmeter
· Flow rate measurement
· Preparation of a pressure loss curve
· Comparison with other flowmeters
Features
Determination of flow rate using the principle of propagation time measurement
Specification
[1] Accessory for the HM 500 Flowmeter Test Stand
[2] Determination of flow rate using the principle of propagation time measurement
[3] Maximum flow rate 3500Ltr/h
[4] Lithium battery power supply 3.6V
[5] Pressure loss measurement on the flowmeter using annular chambers
Technical Data
Operating position: vertical and horizontal
Max. flow rate 3500ltr/h
Pipe connections DN 32
Operation with water
Dimensions and Weight
l x w x h: 820 x 200 x 210 mm
Weight : approx. 8 kg
Scope of Delivery
1 flowmeter, 1 instruction manual
Order Details
070.50005 HMM 500.05 Ultrasonic Flowmeter
Print
© 2005 G.U.N.T. Gerätebau GmbH