G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

>	Fundamentals of Fluid Mechanics
>	Flow in Pipes
>	Turbomachine Demonstrators
>	Turbomachines
>	Fundamentals of Aerodynamics and Airflow
>	Hydrology and Hydraulic Engineering
>	Components in Piping Systems

Process Control and Process Engineering

Overviews

Products | Fluid Mechanics and Hydrology | Hydrology and Hydraulic Engineering | HM 161 | HM 161.46

HM 161.46

Flow Splitters Set of three Models

Technical Description

Using the HM 161.46 accessory, it is possible to perform experiments on pillars in rivers in the HM 161 Large Flow Channel. The unit contains 3 different, separable pillar types, 2 of each type of pillar fitted to the base plate represent the complete experimental set-up ready for installation in the flow channel. Pointed, rounded and flat flow splitters are provided; these can be combined as required. The experimental set-up is made of PVC and is attached to the base of the channel using bolts. The HM 161.54 Base Plate is required for installation in the channel.

Learning Objectives / Experiments

· Influence of pillars on the flow behaviour in open flumes
· Flow behaviour at pillars
· Influence of pillar shape on the flow behaviour
· Measurement of the pillar damming effect

Features

Simulation of bridge pillars in a river

Specification

[1] Flow splitters for installing in the HM 161 Large Flow Channel
[2] Experimental set-up made of PVC,
lxwxh 640x400x615mm
[3] 3 sets of flow splitters: pointed, rounded, flat, lxwxh 210x60x600mm

Technical Data

Pointed flow splitter
Included angle: 60°
Rounded flow splitter
Radius: 30mm

Dimensions and Weight

lxwxh : 640 x 400 x 615 mm
Weight : approx. 20 kg

Scope of Delivery

1 experimental arrangement, 1 set of accessories, 1 instruction manual

Order Details

070.16146 HM 161.46 Flow Splitters, Set of Three Models