Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 163  |  HM 163.34
HM 163.34 Ogee Weir with Manometer Board Show data sheet (pdf file) Print page
Technical Description
The Ogee weir is one of the fixed overflow weirs. The weir body has 8 pressure measuring holes so that the pressure along the back of the weir can be measured. The pressure measuring holes are connected to a manometer panel on the side of the weir. The HM 163.54 Base Plate is required for fastening the weir in the channel. Tubular seals inserted in slots on the weir body complete the experimental set-up.
Learning Objectives / Experiments
· Flow over an overflow weir
· Measurements of the pressure along the back of the weir







For exact measurement of water levels, the use of the HM 163.52 Level Gauge on the HM 163.59 Instrument Carriage is recommended.
Features
Overflow weir with manometer board for displaying the pressure characteristic
Specification
[1] Fixed overflow weir for fitting to the HM 163 Modular Flow Channel
[2] Only for use with the HM 163.54
[3] Weir body made of PVC, lxwxh 480x404x370m
[4] Weir body connected to manometer board
[5] Measuring range of the manometer board 500mm water column, graduations 1mm
Technical Data
Manometer board
Measuring range: 500mmWC
Dimensions and Weight
lxwxh : 480 x 404 x 550 mm
Weight : approx. 12 kg
Scope of Delivery
1 weir, 1 set of accessories,
1 instruction manual
Order Details
070.16334 HM 163.34 Ogee Weir with Manometer Board
Print
© 2005 G.U.N.T. Gerätebau GmbH