Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 163  |  HM 163.46
HM 163.46 Flow Splitters, Set of three Models Show data sheet (pdf file) Print page
Technical Description
Using the HM 163.46 accessory, it is possible to perform experiments on pillars in rivers in the HM 163 Modular Flow Channel. The unit contains 3 different, separable pillar types, 2 of each type of pillar fitted to the base plate represent the complete experimental set-up ready for installation in the flow channel. Pointed, rounded and flat flow splitters are provided; these can be combined as required. The experimental set-up is made of PVC and is attached to the base of the channel using bolts.
Learning Objectives / Experiments
· Influence of pillars on the flow behaviour in open flumes
· Flow behaviour at pillars
· Influence of pillar shape on the flow behaviour
· Measurement of the pillar damming effect
Features
Simulation of bridge pillars in a river
Specification
[1] Flow splitters for installing in the HM 163 Modular Flow Channel
[2] Experimental set-up made of PVC, lxwxh 430x160x525mm
[3] 3 sets of flow splitters: pointed, rounded, flat, lxwxh 140x40x510mm
Technical Data
Pointed flow splitter
Included angle: 43.5°
Rounded flow splitter
Radius: 20mm
Dimensions and Weight
lxwxh : 430 x 160 x 525 mm
Weight : approx. 5 kg
Scope of Delivery
1 experimental arrangement,
1 set of accessories, 1 instruction manual
Order Details
070.16346 HM 163.46 Flow Splitters, Set of three Model
Print
© 2005 G.U.N.T. Gerätebau GmbH