Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Aerodynamics and Airflow  |  HM 240  |  HM 240.05
HM 240.05 Pipe Fittings Show data sheet (pdf file) Print page
Technical Description
With the HM 240.05, an accessory for the HM 240, it is possible to investigate the pipe friction losses in a flow of air for different fittings such as a straight pipe section, an elbow, a bend, and different pipe inlets. The models supplied are made of plastic and are equipped with connections for pressure measurement; these are connected to the Computer Linked Air Flow Bench.
Learning Objectives / Experiments
With HM 240.05, HM 240.01, and HM 240.05, the following experiments are possible:
· Pressure loss measurements on pipe sections
· Pressure loss measurements at an elbow
· Pressure loss measurements at a bend
· Investigation of the influence of different shaped pipe inlets
Features
Friction losses on pipe fittings with a flow of air
Specification
[1] Model on pipe friction losses
[2] lxwxh unassembled 1500x200x400mm,5kg
[3] Bend and elbow, each 90°
[4] Straight pipe section, extension possible
[5] Two different pipe inlets
Technical Data
Pipe section with flange:
1235mm long, inside diameter 53.6mm
Extension: 991mm long (with inlet)
Pipe inlet: undisturbed inlet 22mm radius
Discontinuous enlargement: 35...53.6mm
Dimensions and Weight
lxwxh unassembled : 1500 x 200 x 400 mm
Weight : approx. 5 kg
Scope of Delivery
1 set of models, 1 instruction manual
Order Details
070.24005 HM 240.05 Pipe Fittings
Print
© 2005 G.U.N.T. Gerätebau GmbH