Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Flow in Pipes  |  HM 500  |  HM 500.10
HM 500.10 Paddle-Wheel Turbine Flowmeter with Indicator Show data sheet (pdf file) Print page
Technical Description
The principle of operation of this unit is the generation of a angular frequency on a paddle wheel. The flow is deflected by a nozzle onto the paddle wheel, there the kinetic energy is converted into angular motion. The angular frequency is transmitted to an analysis unit, without contact, by a ring magnet and converted there into an analogue voltage signal. This voltage signal corresponds to the actual flow rate and is displayed on a digital display. The operating area of the unit is fitted with a transparent cover and as a result can be clearly seen.
Learning Objectives / Experiments
· Familiarisation with a paddle wheel sensor
· Flow rate measurement
· Preparation of a pressure loss curve
· Comparison with other flowmeters
Features
Paddle wheel sensor with digital display
Fully visible operating area
Specification
[1] Accessory for the HM 500 Flowmeter Test Stand
[2] Operating area made of Plexiglass
[3] Max. flow rate 2880Ltr/h
[4] Measured data display on digital display
[5] Pressure loss measurement on the flowmeter using annular connections
Technical Data
Operating position: horizontal or vertical
Max. flow rate: 2880Ltr/min
Indication on digital display
Pipe connections DN 32
Operation with water
Dimensions and Weight
l x w x h: 820 x 150 x 200 mm
Weight : approx. 6 kg
Scope of Delivery
1 flowmeter, 1 instruction manual
Order Details
070.50010 HM 500.10 Paddle-Wheel Turbine Flowmeter with Indicator
Print
© 2005 G.U.N.T. Gerätebau GmbH