Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Turbomachines  |  HM 365  |  HM 365.16
HM 365.16 Lobe Pump Module Show data sheet (pdf file) Print page
Technical Description
Lobe pumps are used, when highly viscous liquids have to be transported through pipes. The pump is fitted to a base plate ready for installation. The plate is simply slid into the HM 365.10 Basic Module Water Pumps and fixed in place. The unit is equipped with electronic sensors for recording intake and delivery pressure. After filling with water, the pump is connected to the experimental set-up using flexible hoses. To be able to interchange the pump easily and straightforwardly, the hoses are equipped with rapid action couplings. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and the HM 365.10 Basic Module Water Pumps, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic and operating point of the pump
Features
Investigation of the pump characteristic of a lobe pump
Available accessories
HM 365 -- Universal Drive and Brake Unit
HM 365.10 -- Water Pump Supply Module
Specification
[1] Lobe pump for operation on the HM 365.10 Basic Module Water Pumps
[2] Pump complete with connections and sensors fitted to base plate
[3] Max. capacity 1.5m³/h
[4] Max. head 100m water column
[5] Nominal speed 1500rpm
Technical Data
Maximum capacity: 1.5m³/h
Maximum head: 100m WC
Nominal speed: 1500rpm
Intake connection diameter ¾”
Delivery connection diameter ¾”
Dimensions and Weight
l x w x h: 516 x 300 x 300 mm
Weight : approx. 20 kg
Scope of Delivery
1 lobe pump, fitted to base plate complete with connections and sensors
Order Details
070.36516 HM 365.16 Lobe Pump Module
Print
© 2005 G.U.N.T. Gerätebau GmbH