Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Aerodynamics and Airflow  |  HM 220  |  HM 220.02
HM 220.02 Boundary Layer Flow Show data sheet (pdf file) Print page
Technical Description
The experimental set-up is placed in the HM 220 Air Flow Studies unit with only a few actions. The model consists of a transparent tube in which the flat plate is placed. Above the plate, a vertically adjustable Pitot tube is fitted using which the flow speeds at the plate can be measured. The Pitot tube can be fitted on a holder in 3 positions along the plate. The Pitot tube is connected to the manometer belonging to the studies unit.
Learning Objectives / Experiments
· Measurement of the boundary layer
· Speed profile of the flow over the plate
Features
Pipe with flat plate with flow for boundary layer experiments on the Air Flow Studies Unit
Specification
[1] Tube with boundary layer for placing in the HM 220 Air Flow Studies Unit
[2] Transparent observation tube with flat plate or boundary layer experiments
[3] 3 holders for Pitot tube for horizontal measurement of the boundary layer
[4] Pitot tube with micrometer bolt, vertically adjustable
Technical Data
3 holders for Pitot tube for horizontal measurement at the plate
Vertical adjustment of Pitot tube 25mm
Flat plate 420x80x3, chamfered at 15°
Dimensions and Weight
l x w x h: 650 x 150 x 300 mm
Weight: approx. 4 kg
Scope of Delivery
1 boundary layer tube
Order Details
070.22002 HM 220.02 Boundary Layer Flow
Print
© 2005 G.U.N.T. Gerätebau GmbH