Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning
> Heating and Ventilation
> Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Thermodynamics, Heating and Sanitary Systems  |  Applied Thermodynamics  |  WL 314  |  WL 314.01
WL 314.01 Parallel Flow Module Show data sheet (pdf file) Print page
Technical Description
The heat transfer in and around pipes can be investigated using the WL 314.01. The heat transfer from the pipe wall to the medium is observed. A ring heater simulates the flow inside the pipe, while a rod heater reflects the conditions in the flow around a pipe. The power and surface temperature of the two electrical heaters are measured and displayed on the base unit WL 314.
Learning Objectives / Experiments
· Consideration of the relationships between Nusselt, Reynolds and Prandtl
· Determination of heat transfer coefficient
· Calculation of the air velocity
Features
Completely pre-assembled study unit with heaters
Specification
[1] Accessory für WL 314, parallel flow module
[2] lxwxh 1050x200x280mm, 10kg
[3] Air duct dimensions: diameter 60mm
[4] Ring heater 220W, rod-type heater 250W
[5] 2 thermocouples type K: Temperature measurement at the top of the rod-type heater and at the inner surface of the ring heater
[6] Mounted in WL 314 w. quick-action fasteners
Technical Data
Ring heater: Æ60mm, 30mm long
Rod-type heater: Æ8mm, 250mm long
Duct cross-section: diameter 60mm
Supply via WL 314
Dimensions and Weight
l x w x h : 1050 x 200 x 280 mm
Weight : approx. 10 kg
Scope of Delivery
1 unit complete with heaters,
1 instruction manual
Order Details
060.31401 WL 314.01 Parallel Flow Module
Print
© 2005 G.U.N.T. Gerätebau GmbH