Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning
> Heating and Ventilation
> Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Thermodynamics, Heating and Sanitary Systems  |  Sanitary Systems  |  HL 900  |  HL 900.17
HL 900.17 Waste Water Bend Module Show data sheet (pdf file) Print page
Technical Description
The bend is mounted on a panel and is made of high-temperature pipe made of PP. According to DIN 19560, pipes of this type may be used as hot-water-resistant waste water lines within buildings, but not underground or outdoors. Pipe connections are created using a connecting sleeve with a rubber roll ring as sealing element. The bend is a 87° bend; the following connected line has a slope of 3°. The bend is used in the experimental set-ups for water drainage.
Learning Objectives / Experiments
· Single module for the construction of sanitary installations on the base unit HL 900
Features
Accessory for the HL 900 series
Specification
[1] Waste water bend for the HL 900 series for sanitary installations on the base unit
[2] Bend made of high-temperature pipe according to DIN 19560
[3] Nominal diameter 50mm, 87° bend
[4] Waste water bend on panel 200x200x4mm
Technical Data
Nominal diameter: 50mm
Bend: 87°
Dimensions and Weight
l x w x h : 200 x 200 x 60 mm
Weight : approx. 1 kg
Scope of Delivery
1 panel with waste water bend
Order Details
065.90017 HL 900.17 Waste Water Bend Module
Print
© 2005 G.U.N.T. Gerätebau GmbH