|
|
The CT 159.02 is an accessory for the CT 159, CT 110, CT 300 and CT 400 engine test stands and the associated engines. The unit can be used to measure the exhaust gas composition (CO, CO2, HC, O2), the excess air factor λ and the oil temperature in the engine. The menu-based display on the unit is used for calibration, operation and to display the measured data. Interfaces allow it to be connected to a PC or external printer. The measuring accuracy complies with OIML Class 1 (Organisation Internationale de Métrologie Légale) and meets the requirements of the Physikalisch-Technische Bundesanstalt (German national metrology institute; PTB). |
 |
Learning Objectives / Experiments |
- Measurement of residual oxygen content in exhaust gas
- Measurement of carbon monoxide and carbon dioxide
- Measurement of hydrocarbons
- Determination of excess air factor
- Measurement of oil temperature |
|
|
|
Features
|
|
|
* Measurement of relevant exhaust gas parameters on internal combustion engines |
|
|
|
| Specification |
[1] Exhaust gas analysis unit for engines
[2] Menu-based display for calibration, operation and displaying measured values
[3] Temperature sensor for measurement of engine oil temperature
[4] RS232 interface |
| Technical Data |
Measuring ranges
- CO: 0...10% vol.
- CO2: 0...20% vol.
- O2: 0...22% vol.
- HC: 0...2000ppmv.
- Lambda: 0...9.999
- oil temperature: 0...130°C
- accuracy classes 1 and 0
Working temperature: 5...45°C |
| Dimensions and Weight |
l x w x h : 430 x 295 x205 mm
Weight : approx. 9 kg |
| Connections |
| 230V, 50Hz, 1 phase |
| Scope of Delivery |
1 exhaust gas analysis unit
1 probe
1 instruction manual |
| Order Details |
063.15902 CT 159.02 Exhaust Gas Analyzing Unit
|
|
