G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

Mechatronics

Thermodynamics, Heating and Sanitary Systems

>	Fundamentals of Thermodynamics
>	Applied Thermodynamics
>	Power Engines and Machines
>	Internal Combustion Engines
>	Refrigeration and Air Conditioning
>	Heating and Ventilation
>	Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Thermodynamics, Heating and Sanitary Systems | Internal Combustion Engines | CT 110 | CT 100.13

CT 100.13

Electronic Engine Indicating System for CT 110

Technical Description

The system is used in conjunction with the CT 100.14 spark plug pressure transducer and the CT 100.16 pressure transducer. It allows pressure measurements to be carried out in the cylinder head of an internal combustion engine and is designed for the CT 100.20 and CT 100.22 engines. The data is transferred to a PC for further processing. The software produces p-t and p-V diagrams, and also displays the average pressure and the indicated power output.
The system consists of an inductive TDC sensor, measuring amplifiers for the pressure transducer and TDC sensor, software and data acquisition card.

Learning Objectives / Experiments

- Familiarisation with and use of an electronic cylinder pressure
indication system
- p-t diagram (top left)
- p-V diagram (bottom)
- Pressure curve for gas cycle (top right)
- Determination of indicated power output from p-V diagram

Features

* Cylinder pressure indication system, suitable for

CT 100.20 and CT 100.22 test engines

Available accessories

CT 100.14 -- Pressure Transducer for CT 100.20
CT 100.16 -- Pressure Transducer for CT 100.22

Specification

[1] Cylinder pressure indication system for internal combustion engine
[2] Only to be used in conjunction with CT 100.14 or CT 100.16 pressure transducer
[3] Chronological representation of pressure curve against the crank angle in p-t diagram to determine the maximum pressure and to monitor the ignition point and the pressure increase
[4] Representation of pressure curve against the standardised piston capacity in p-V diagram to determine the indicated power output
[5] System consists of measuring amplifier, TDC sensor, data acquisition card and software for Windows XP

Technical Data

Measuring amplifier: amplification factor 10mbar/mV
TDC sensor trigger distance: 1mm

Dimensions and Weight

l x w x h amplifier: 270 x 250 x 100 mm
Weight : approx. 4 kg

Connections

230V, 50Hz, 1 phase

Scope of Delivery

1 measuring amplifier
1 TDC sensor
1 data acquisition card with software
1 instruction manual

Order Details

063.10013 CT 100.13 Electronic Engine
Indicating System for CT 110