G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Material Testing | WP 600

WP 600

Creep Testing Machine

Technical Description

Using the tester, typical phenomena such as phases of varying creep rates or temperature-dependent creep behaviour can be demonstrated in a simple creep rupture test. To obtain acceptable creep rates at room temperature, flat lead and plastic specimens are used. The unit comprises a base plate, support pillar with adjustable end stop, transmission lever and load weight. To avoid placing bending loads on the specimen, the specimen holders are equipped with knife-edge bearings. With the aid of a transparent conditioning box with thermal storage elements, experiments can be performed above or below room temperature.

Learning Objectives / Experiments

· Creep experiment with a lead specimen
· Creep experiment with a plastic probe

Features

· Demonstration of typical creep phenomena
· Experiments can also be performed at room temperature

Available accessories

WP 600.01 -- Set of 10 Test Specimens, PE
WP 600.02 -- Set of 10 Test Specimens, Pb

Specification

[1] Table unit for the investigation of the creep behaviour of different materials
[2] Flat specimens made of lead and PE
[3] Specimen cross-section 2x5mm, measured length 25mm
[4] Tensile stress range 5...25Nmm¯²
[5] Position measurement gauge 0...10mm, resolution 0.01mm
[6] Experiments above or below room temperature possible with conditioning box

Technical Data

Specimen material: lead, PE
Specimen cross-section: 2x5mm
Measured length: 25mm
Tensile stress range: 5...25Nmm¯²
Position measurement range: 0...10mm, resolution 0.01mm

Dimensions and Weight

l x w x h : 700 x 350 x 510 mm
Weight : approx. 23 kg

Scope of Delivery

1 complete creep testing machine,
1 set of experiment instructions

Order Details

020.60000 WP 600 Creep Testing Machine