 |
|
|
|
 |
WP 300
Universal Material Tester, 20 kN
Familiarising students with the basic concepts of material testing
|
 |
WP 300.04
Bending Device
Bending beam under point load
|
 |
WP 300.10
Device for Shearing Experiments
Type of shear loading as on rivets and bolts
|
 |
WP 300.11
Device for Cupping Experiments
Practical cupping experiment for the investigation of the material properties of thin sheet
|
 |
WP 310
Hydraulic Universal Material Tester, 50 kN
Stand alone unit with hydraulic drive for a variety of material tests
|
 |
WP 350
Educational Tensile Tester,2 kN
Portable unit for basic experiments on material testing
|
 |
WP 400
Pendulum Impact Tester, 25 Nm
Experimental unit for notched bar impact tests
|
 |
WP 410
Pendulum Impact Tester, 300 Nm
Notched bar impact bending test with increased impact energy
|
 |
WP 500
Torsion Tester, 30 Nm
Fundamental experiments on torsional loading
|
 |
WP 502
Torsion Testing Machine, 100 Nm manually operated
Torsion moment measurement using strain gauge measuring shaft and amplifier
|
 |
WP 510
Torsion Testing Machine, 200 Nm, Motor Driven
Motor driven torsion experiments with PC data acquisition
|
 |
WP 140
Fatigue Testing Machine
Portable unit for the demonstration of fatigue strength testing
|
 |
WP 600
Creep Testing Machine
Investigation of materials with a known tendency to creep
|
|
