Technical Description |
 |
|
This material tester is a table unit for training purposes. Simple operation and robust construction make the unit suitable for student experiments. The test spectrum for the basis unit covers tensile and compressive strength tests, and also Brinell hardness testing. Using the accessories that are also available, additional bending, shear and cupping tests can be performed. PC data acquisition and evaluation is also possible.
The basic version of the unit does not require any additional sources of power. The test load is generated using a hand operated hydraulic system. The test load is displayed using a large gauge and a trailing pointer. The elongation of the test specimen is recorded via a mechanical gauge. The unit can also be fitted with electronic force and position measurement. The unit features a clear layout and the rapid changing of accessories. |
 |
Learning Objectives / Experiments |
· Tensile and compressive strength tests
· Recording of stress-strain diagrams
· Brinell hardness testing
With accessories available separately:
· Bending tests
· Cupping tests
· Shear tests
· Testing of disc and helical springs |
|
|
|
Features
|
|
|
· Compact, clear universal unit for basic experiments on materials testing
· Tensile strength, compressive strength, bending, shear and cupping tests
· Brinell hardness testing
· Recording of characteristic curves
· Can be extended with electronic data acquisition |
|
|
|
Available accessories
|
|
|
WP 300.02 -- Set of 4 Tension Test Rods: Aluminum, Copper, Steel, Brass
WP 300.03 -- Set of 4 Brinell Specimens: Aluminum, Copper, Steel, Brass
WP 300.04 -- Bending Device
WP 300.05 -- Compression Plates, Set of 2, with fastening elements
WP 300.06 -- Coil Spring Test, 2 sets
WP 300.07 -- Disk Spring Test
WP 300.10 -- Device for Shearing Experiments
WP 300.11 -- Device for Cupping Experiments
WP 300.12 -- Measuring Magnifier for Brinell Impression
WP 300.13 -- Device f. Shear Test unsymmetrical
WP 300.14 -- Chucks for flat tensile specimen
WP 300.20 -- PC Data Acquisition System
WP 300.21 -- Set of 4 Tension Rods: Aluminum
WP 300.22 -- Set of 4 Tension Rods: Copper
WP 300.23 -- Set of 4 Tension Rods: Steel
WP 300.24 -- Set of Tension Rods: Brass
WP 300.25 -- Set of 4 Tension Specimens,flat, Aluminium, Copper, Steel, Brass
WP 300.31 -- Set of 4 Brinell Specimens, Aluminum
WP 300.32 -- Set of Brinell Specimens, Copper
WP 300.33 -- Set of Brinell Specimens, Steel
WP 300.34 -- Set of Brinell Specimens, Brass
WP 300.41 -- Set of 5 Deep Draw Specimens, Aluminum
WP 300.42 -- Set of 5 Deep Draw Specimens, Copper
WP 300.43 -- Set of 5 Deep Draw Specimens, Steel
WP 300.44 -- Set of 5 Deep Draw Specimens, Brass
WP 300.52 -- Set of 5 Shear Specimens, Copper
|
|
|
Alternative products
|
|
|
MT 190 -- Assembly Project: Materials Tester
WP 310 -- Hydraulic Universal Material Tester, 50 kN
WP 350 -- Educational Tensile Tester,2 kN
|
|
|
| Specification |
[1] Universal table unit for materials testing
[2] Max. test force 20kN
[3] Max. stroke 45mm
[4] Available space for test specimens 165x65mm
[5] Dynamometer 0...20kN, graduations 0.5kN, gauge with trailing pointer, Ø160mm
[6] Measuring range for elongation 0...10mm / 0.01mm
[7] Tensile specimens B6x30 DIN 50125
[8] Hardness specimens l x w x h 30x30x10mm
[9] Test sphere diameter Ø10mm
[10] Force generation using hand operated hydraulic system, no power supply necessary
[11] Cross-member frame with ground steelpillars, compressive and tensile force can be generated
[12] Cast machine base with rubber feet
[13] l x w x h 610x520x850mm |
| Technical Data |
Max. test force: 20kN
Max. stroke: 45 mm
Space available for specimens: 165x65mm
Dynamometer: 0...20kN, graduations: 0.5kN
Elongation gauge: 0...10mm, graduations: 0.01mm
Tensile specimens: B6x30 DIN 50125
Hardness specimens: l x w x h 30x30x10mm
Test sphere diameter: Ø10mm |
| Dimensions and Weight |
l x w x h : 610 x 520 x 850 mm
Weight : approx. 51 kg |
| Scope of Delivery |
1 base unit,
1 hardness test jig,
1 gauge,
4 sets of tensile strength specimens B6x30 DIN 50125,
4 sets of hardness specimens,
1 set of experiment instructions |
| Order Details |
020.30000 WP 300 Universal Material Tester, 20 kN
|
|
