Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Material Testing  |  WP 300  |  WP 300.23
WP 300.23 Set of 4 Tension Rods: Steel Show data sheet (pdf file) Print page
Technical Description
This set of tension rods is available as an accessory for the WP 300 Universal Material Tester. The set contains four tension rods made of steel (9CMn28). The rods comply with the requirements of DIN 50125 and are of circular cross-section. The test length is marked with two centre punch marks on the shafts. The ends of the rods have M10 threads for attachment.
Learning Objectives / Experiments
· Tensile tests with steel rods on the WP 300 Universal Material Tester
Features
Tension rods made of steel in accordance with DIN 50125 as accessories for the WP 300 Univerasal Material Tester
Specification
[1] Accessory set of tension rods for tensile testing using the WP 300 Universal Material Tester
[2] Rods B 6 x 30 in accordance with DIN 50125, circular cross-section, attachment thread M10
[3] Rod material: steel (9SMn28)
Technical Data
Tension rods B6x30 in accord. with DIN 50125
Rod diameter: 6mm
Test length: 30mm
Total rod length: 64mm
Attachment thread: M10
Scope of Delivery
4 tension rods made of steel (9SMn28)
Order Details
020.30023 WP 300.23 Set of 4 Tension Rods: Steel
Print
© 2005 G.U.N.T. Gerätebau GmbH