Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Material Testing  |  WP 300  |  WP 300.11
WP 300.11 Device for Cupping Experiments Show data sheet (pdf file) Print page
Technical Description
This supplement to the WP 300 Universal Material Tester enables deep-drawing and cupping experiments to be performed to assess the material properties of thin sheet. The deep-drawing conditions are similar to those used in practice. A sheet specimen is clamped between the die and the holder. The specimen is then deformed using a spherical punch until it cracks. A mirror permits the underside of the specimen to be observed and thus makes it possible to see exactly how cracking starts. Using this device thin sheets up to thickness of 2mm can be investigated.
Learning Objectives / Experiments
· Deep-drawing experiment for the determination of the quality of thin sheets made of different materials
Features
Practical deep-drawing experiment for the investigation of the material properties of thin sheet
Specification
[1] Deep-drawing experiment for assessing the quality of thin sheet as a supplement to the WP 300 Universal Material Tester
[2] Sheet specimen thickness max. 2mm
[3] Specimen mat. steel, aluminium, copper, brass
[4] Spherical drawing punch, diameter 20mm
[5] Die diameter 27mm
[6] Mirror for the observation of the underside of the specimen
Technical Data
Specimen material: steel, aluminium, brass, copper
Specimen dimensions: 60x60mm, thickness max. 2mm
Drawing punch: sphere 20mm
Die diameter: 27mm
Scope of Delivery
1 deep-drawing device, complete, St, Cu, Al, CuZn deep-draw specimens 5 of ea, 1 instruction manual
Order Details
020.30011 WP 300.11 Device for Cupping Experiments
Print
© 2005 G.U.N.T. Gerätebau GmbH