Technical Description |
 |
|
| This table unit is suitable for performing the most important material tests. It is designed for tensile tests on metal specimens. A cross-member fitted to the base plate transfers the forces to the specimens. The specimens are retained using gripping heads. A threaded spindle that can be driven either by hand or using an electric motor places a tensile or compressive force of up to 2kN on the specimens. The test load is measured using a ring dynamometer, the specimen elongation with a position measurement gauge. A mechanical drum plotter is included for recording results on paper. The unit can also be equipped with a PC data acquisition accessory. Due to the clear, straightforward layout of all elements on the base plate, the student can observe all stages of the experiment with ease. |
 |
Learning Objectives / Experiments |
· Tensile test on different materials
· Compression test
· Bending test |
|
|
|
Features
|
|
|
Universal table unit for tensile, compression and bending tests on different materials
Choice of electrical or manual drive
Integrated drum recorder for recording load-extension diagrams on paper
Strong, clear construction |
|
|
|
Available accessories
|
|
|
WP 350.02 -- Bending Device
WP 350.03 -- Set of two Compression Plates
WP 350.20 -- set of 4 tensile specimen, steel, brass, copper, aluminium
WP 350.60 -- PC-aided Data Acquisition System
|
|
|
Alternative products
|
|
|
WP 300 -- Universal Material Tester, 20 kN
WP 310 -- Hydraulic Universal Material Tester, 50 kN
|
|
|
| Specification |
[1] Universal table unit for performing tensile, compression and bending tests on materials
[2] Drive via electric motor or by hand
[3] Test force up to 2kN, both tensile and compressive
[4] Test stroke up to 100mm
[5] Ring dynamometer with mech. gauge ±2kN, resolution 50N
[6] Mechanical gauge for elongation measurement 0...10mm, resolution 0.01mm
[7] Specimens: steel, brass, copper, aluminium
[8] Tensile test specimen length 30mm, cross-section 3x1mm
[9] Mech. drum plotter for measurement diagrams
[10] Connection 230V,~50Hz
[11] l x w x h 620x430x240mm |
| Technical Data |
Test force: max. 2kN, tensile and compression
Test stroke: max. 100mm
Measuring range, ring dynamometer: ±2kN,
Resolution 50N
Measuring range elongation measurement: 0...10mm, Resolution 0.01mm
Drive: choice of manual or electric motor
Tensile test specimen material:
steel, brass, copper, aluminium
Length: 30mm, cross-section: 3x1mm |
| Dimensions and Weight |
l x w x h : 620 x 430 x 240 mm
Weight : approx. 30 kg |
| Connections |
| 230V , ~50Hz |
| Scope of Delivery |
1 complete tester,
1 set of experiment instructions |
| Order Details |
020.35000 WP 350 Educational Tensile Tester, 2 kN
|
|
