Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Material Testing  |  WP 350  |  WP 350.20
WP 350.20 set of 4 tensile specimen, steel, brass, copper, aluminium Show data sheet (pdf file) Print page
Technical Description
This set of flat tension specimens is available as an accessory for the WP 350 Educational Tensile Tester. The specimens are of rectangular cross-section. To mark the test section length there are two light centre punch marks on each of the specimens. The specimens have a widened section at both ends for attachment. Using this the specimens can be hung in the specimen holders of WP 350 Educational Tensile Tester. The set contains one tension specimen made of aluminium (AlMgSi0,5F22), one of copper (E-Cu), one of brass (CuZn39Pb3) and one of steel (St37k).
Learning Objectives / Experiments
· Tensile tests with flat specimens made of different materials on the WP 350 Educational Tensile Tester
Features
Flat tension specimens of rectangular cross-section as accessories for the WP 350 Educational Tensile Tester
Specification
[1] Accessory set of flat specimens made of different materials for tensile tests using the WP 350 Educational Tensile Tester
[2] Specimen dimensions: 70 x 15 x 1mm, Test section length: 30mm
[3] Specimen material: aluminium, copper, brass, steel
Technical Data
Specimen dimensions: 70 x 15 x 1mm
Test section length: 30mm
Specimen material: aluminium (AlMgSi0,5F22), copper (E-Cu), brass (CuZn39Pb3), steel (St37k).
Scope of Delivery
1 aluminium specimen, 1 copper specimen
1 steel specimen, 1 brass specimen
Order Details
020.35020 WP 350.20 set of 4 tensile spec., steel, brass, copper, aluminium
Print
© 2005 G.U.N.T. Gerätebau GmbH