Technical Description |
 |
|
| Due to the clear, straightforward layout of this materials tester, tests can be observed in detail during all phases; this is rarely possible on industrial testers. Nevertheless, the capacity of the tester is sufficient to carry out tests of an industrial nature. Simple operation and robust construction make the tester particularly suitable for student experiments. The tester is a vertical, hydraulically operated pillar tester with direct generation of both tensile and compressive forces. The height of the lower cross-member can be adjusted in steps for coarse adjustment. Cylindrical receptacles on the cross-members make the different experimental set-ups easy to change, e.g. wedge clamps (accessory WP 310.05, as shown in pic. left). Force and displacement are measured electronically, and displayed digitally. For experiments specimen according DIN 50125 can be used. |
 |
Learning Objectives / Experiments |
Base system for generating compressive and tensile forces for materials testing; comprehensive accessories enable the following to be performed:
· Brinell hardness testing
· Compression tests
· Bending tests
· Shear tests
· PC data acquisition |
|
|
|
Features
|
|
|
hydraulically operated pillar tester with direct generation of force
both tensile and compressive forces can be generated
Test force in both directions 50kN
digital force and displacement displays
evaluation software, serial interface |
|
|
|
Available accessories
|
|
|
WP 310.01 -- Device for Testing Brinell Hardness
WP 310.02 -- Device for Shearing Test
WP 310.03 -- Device for Bending Test, Destructive
WP 310.04 -- Compression Plates for Compression Test
WP 310.05 -- Wedge Grip Chucks Round & Flat Specimen
WP 310.06 -- Chucks for Threaded End Tensile Specimen
WP 310.07 -- Grips for Dumbbell Head Tensile Specimen
WP 310.08 -- Device for testing helical springs
WP 310.09 -- Device for testing disc springs
WP 310.10 -- Device for deep draw experiments
WP 310.11 -- Set of Specimens St B10 x 50 DIN 50125 M16 (10 pcs.)
WP 310.12 -- Set of Specimens St F10 x 50 DIN 50125 (10 pcs.)
WP 310.13 -- Set of Dumbbell Head Test Rods
|
|
|
Alternative products
|
|
|
WP 300 -- Universal Material Tester, 20 kN
WP 350 -- Educational Tensile Tester,2 kN
|
|
|
| Specification |
[1] Universal, hydraulically operated tester for materials testing
[2] Max. test force 50kN
[3] Max. piston stroke 150mm
[4] Principle of force measurement, full bridge strain gauges up to 50kN, max. overload 200 %, acoustic overload signal
[5] Linear potentiometer for measuring displacement, range 0...150mm
[6] Measurement repetition rate 2.5 1/s
[7] 6-digit LED digital displays for force and displacement, display height 14.2mm
[8] Zero and maximum value memory
[9] Evaluation software, Serial interface
[10] Power supply 230V,~50Hz
[11] l x w x h 1000x750x1750mm |
| Technical Data |
Max. test force: 50kN, hydraulic
Max. system pressure: 175bar
Drive rating: 0.55kW
Max. piston stroke: 150mm
Force transducer: full bridge strain gauges up to 50kN max., overload: 200%
Acoustic overload indication
Position encoder: lin. potentiometer 0...150mm
Interface: serial, RS232
Measurement repetition rate: 2.5 1/s |
| Dimensions and Weight |
l x w x h : 1000 x 750 x 1750 mm
Weight : approx. 380 kg |
| Connections |
230V , ~50Hz
Other stresses on request |
| Scope of Delivery |
1 pillar tester,
1 evaluation software
1 instruction manual
( PC not included ) |
| Order Details |
020.31000 WP 310 Hydraulic Universal Material Tester, 50kN
|
|
