Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Material Testing  |  WP 300  |  WP 300.03
WP 300.03 Set of 4 Brinell Specimens: Aluminum, Copper, Steel, Brass Show data sheet (pdf file) Print page
Technical Description
This set of metal specimens is available as an accessory for the WP 300 Universal Material Tester. The specimens are square and are intended for Brinell hardness testing. The set contains one specimen made of aluminium (AlMgSi0,5F22), one of copper (E-Cu), one of brass (CuZn39Pb3) and one of steel (St37k).
Learning Objectives / Experiments
- Brinell hardness testing using different materials on the WP 300
  Universal Material Tester
Features
* Square metal specimens for Brinell hardness testing
  as accessories for the WP 300 Universal Material
  Tester
Specification
[1] Accessory set of metal specimens made of different materials for Brinell hardness testing using the WP 300 Universal Material Tester
[2] Specimen dimensions 30x30x10mm
[3] Specimen material: aluminium (AlMgSi0,5F22), copper (E-Cu), brass (CuZn39Pb3), steel (St37k)
Technical Data
Specimen dimensions: 30x30x10mm
Scope of Delivery
1 aluminium specimen, 1 copper specimen, 1 steel specimen, 1 brass specimen
Order Details
020.30003  WP 300.03  Set of 4 Brinell Specimens:
                      Al, Cu, Steel, Brass
Print
© 2005 G.U.N.T. Gerätebau GmbH