G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Material Testing | WP 140

WP 140

Fatigue Testing Machine

Technical Description

Using this table unit, the basic principles of fatigue testing can be conveyed. A rotating metal test bar, clamped at one end, is loaded using a spring balance with a point force. This results in a cyclic bending load on the cylindrical specimen. The amplitude of the cyclic loading can be continuously adjusted using a threaded spindle with hand wheel. After a certain number of load cycles, the specimen breaks as a result of material fatigue. In this case the machine is shut down automatically by the stop switch. The number of load cycles is counted by an electrical counter and displayed digitally. This can also be used for measuring the speed. Different shape specimens enable the influence of notching and surface finish on fatigue strength to be demonstrated.

Learning Objectives / Experiments

· Fatigue strength of bars subject to cyclic bending load
· Influence of different curvature radii and surface finish on fatigue strength
· Preparation of a stress-number (S-N) diagram

Features

Continuous adjustment of the load amplitude
Different shape specimens demonstrate the influence of notching and surface finish
Digital counter for load cycle display
Automatic shut down on specimen fracture
PC data acquisition available as accessory

Available accessories

WP 140.01 -- Set of 3 Specimens Steel
WP 140.20 -- PC Data Acquisition System

Specification

[1] Table unit for fatigue strength testing
[2] 3 cylindrical specimens made of steel, Ck35
[3] Special shape specimens for demonstrating the influence of notching and surface finish
[4] Recording of a stress-number (S-N) diagram
[5] Motor speed 2800rpm, power output 0.37kW
[6] Single phase electric motor, 230V , 50Hz
[7] Loading with spring balance 0...300N
[8] Adjustment using threaded spindle with hand wheel
[9] Loading via moveable plain bearing
[10] Automatic shut down on specimen fracture by stop switch integrated into the bearing
[11] Electronic load cycle and revolutions counter with 8-digit digital display
[12] Contactless inductive speed sensor
[13] l x w x h 920x420x560mm

Technical Data

Motor speed: 2800rpm
Motor output: 0.37kW
Load: 0...300N
Load cycle counter, electronic,
8-digit digital display,
can be switched to display speed
Test bars: tempering steel Ck 35

Dimensions and Weight

l x w x h : 920 x 420 x 560 mm
Weight : approx. 41 kg

Connections

230V , ~50Hz

Scope of Delivery

1 complete fatigue testing machine,
3 test bars,
1 set of experiment instructions

Order Details

020.14000 WP 140 Fatigue Testing Machine