Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Dynamics  |  TM 611
TM 611 Rolling Disc on Inclined Plane Show data sheet (pdf file) Print page
Technical Description
This table unit enables basic experiments to be performed on dynamics and is ideal for laboratory experiments. A metal carrier with a three point support is used as an inclined plane for the experiment; the different rotating masses are rolled down this plane. The inclined plane can be precisely aligned using two integrated sprit levels and three bolts. The angle of inclination is adjusted using an adjustment bolt and is indicated by the built-in inclinometer. The inclinometer uses the plumb line principle. A 1000mm ruler is integrated directly into the inclined plane for measuring the travel. The steel rotating masses each have self-centering conical pins. Using a separate pendulum block the moment of inertia of the rotating masses can be determined by swinging.
Learning Objectives / Experiments
· Demonstration of the law of gravity on an inclined plane
· Influence of the mass of a body on its acceleration
· Determination of the moment of inertia on rotating masses by performing a rolling test
· Determination of the moment of inertia by performing a pendulum test
· Influence of the moment of inertia of a rotating mass on its angular acceleration
Features
Comparative determination of inertia of rotation by rolling down an inclined plane and by performing pendulum experiments
Alternative products
EM 026 -- Linear Motion Apparatus
TM 110.01 -- Supplementary Kit Inclined Plane and Friction
Specification
[1] Experiments on the law of gravity on an inclined plane and on the angular acceleration of discs
[2] Plane 1000mm, angle of inclination up to 7°
[3] Three spirit levels, three alignment bolts
[4] Rotating masses 0.62kg and 0.32kg, pins Ø10mm, self-centering conical
[5] Mass diameter Ø100mm and Ø70mm
[6] l x w x h 1200x300x280mm
Technical Data
Length of the inclined plane: max.1000mm
Inclination angle of the inclined plane: max. 7°
Disc diameter: Ø100mm and Ø70mm
Rotating masses: 0.62kg and 0.32kg
Shaft pin diameter: each Ø10mm
Dimensions and Weight
l x w x h : 1200 x 300 x 280 mm
Weight : approx. 10 kg
Scope of Delivery
1 inclined plane base, 1 pendulum block,
2 rotating mass discs, 1 instruction manual
Order Details
040.61100 TM 611 Rolling Disc on Inclined Plane
Print
© 2005 G.U.N.T. Gerätebau GmbH