Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 110
HM 110 Hydrodynamics Trainer Show data sheet (pdf file) Print page
Technical Description
The hydrodynamic trainer HM 110 permits basic experiments on fluid mechanics. The experiment is set up clearly on a mobile laboratory trolley. Thanks to the closed water circuit the test stand is especially well suited for use in seminars and lecture rooms. The system includes a variable-area flowmeter, an electronic differential pressure gauge and other pressure measuring devices. The objects to be measured are various pipelines and add-on parts, five of which represent different types of pipe installations (such as a membrane valve or dirt trap). In order to make the function of the unit visible, three of the objects are made of Plexiglas: they represent a Venturi tube, pitot tube and measuring orifice/nozzle. The measuring points and pressure gauges are connected with hoses and rapid action hose couplings.
Learning Objectives / Experiments
· Measurement of pressure and speed with the pitot tube
· Measurement of flow rate with nozzle and orifice
· Investigations at the fittings: Comparative measurement of pressure loss, head loss and flow rate in relation to the degree of opening
· Investigations at the pipelines: Pipe flow with and without friction, narrowing and widening of pipe, angles and bends
Features
Clear layout for flow-related experiments
Mobile multipurpose laboratory trolley
Closed water circuit
Many flow-related measurement objects
Hose connections with rapid action hose couplings
Available accessories
HM 110.01 -- Set of Measuring Objects, Brass
Alternative products
HM 112 -- Hydrodynamics Trainer / PC
HM 120 -- Pipe Fitting Loss Demo Panel
HM 122 -- Fluid Friction in Pipes and Fittings
HM 125 -- Pipe Friction Bench
HM 150.11 -- Fluid Friction Apparatus
Specification
[1] Experimental set-up for flow-related experiments
[2] Closed water circuit
[3] Water supplied from tank via pump
[4] Flow rate measured with variable-area flowmeters
[5] Hose connections with rapid action hose couplings
[6] Pressure measurement with annular chambers
[7] Experiment instructions include illustration of fundamental principles
Technical Data
Measuring section for installation of various measurement objects, PVC, 32 x 1.8
Three pipe sections, straight, 1000mm:
1)½", St, galvanised 2)18 x 1, Cu 3)20 x 1.5,PVC
Pipe section, narrowing continuously: 20x1.5-16x1.2,PVC, widening continuously: 20x1.5-32x1.8,PVC
Pipe section with 90° angle/bend,20x1.5,PVC
Electronic pressure sensor: +/-2000mbar
Flowmeter, Precision Class 1.6
Measuring range: -small: 1060Ltr/h -large: 2800Ltr/h
Dimensions and Weight
l x w x h: 2000 x 780 x 1900 mm
Weight: approx. 145 kg
Connections
230V,~50Hz
Scope of Delivery
1 test stand, completely assembled, 1 set of measuring objects, 1 set of hose connections with couplings,1 instruction manual
Order Details
070.11000 HM 110 Hydrodynamics Trainer
Print
© 2005 G.U.N.T. Gerätebau GmbH