Technical Description |
 |
|
| The unit is portable and is thus suitable for field use. Power can be supplied either using a rechargeable battery, or from the mains. The unit enables, amongst other aspects, the O2, CO, CO2 and nitrogen oxides in flue gasses from boilers to be measured at the same time as the flue gas and combustion air temperature are measured. Along with the display, the unit is equipped with a thermal printer and a PC interface. Apart from a PC, it is also possible to connect, for example, the HL 868 Large Display. |
 |
Learning Objectives / Experiments |
· Measurement of residual oxygen in the flue gas
· Measurement of carbon monoxide, carbon dioxide
· Measurement of nitrogen oxide
· Measurement of flue gas and combustion air temperature, other measurements |
|
|
|
Features
|
|
|
Measurement of all flue gas relevant parameters
Thermal printer and PC interface integrated |
|
|
|
Available accessories
|
|
|
HL 868 -- External Display for Exhaust Gas Analyser
|
|
|
Alternative products
|
|
|
CT 159.02 -- Exhaust Gas Analyzing Unit
|
|
|
| Specification |
[1] Portable flue gas analyser in metal case, for simultaneous measurement of combustion air and flue gas temperature, residual oxygen, carbon monoxide, flue gas losses, combustion efficiency, ideal draught and excess air number
[2] Rechargeable battery operation or mains operation possible
[3] Main operation switchable from 230V,~50Hz to 110V,~60Hz |
| Technical Data |
Measuring range for residual oxygen 0..20.9%
Measuring range for carbon monoxide 0..2000ppm
Measuring range for carbon dioxide depends on fuel
Measuring range for nitrogen oxide 0..2000ppm
Measuring range for flue gas temperature -20..800°C |
| Dimensions and Weight |
l x w x h : 425 x 185 x 290 mm
Weight : approx. 12 kg |
| Scope of Delivery |
| 1 flue gas analyser, complete with accessories in metal case, 1 instruction manual |
| Order Details |
065.86000 HL 860 Exhaust Gas Analyser
|
|
