G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Dynamics | TM 140

TM 140

Torsional Vibration Apparatus

Technical Description

This table unit is used to explain torsion and torsional vibration in experiments. Demonstrations and student experiments are both foreseen in equal measures. The core of the experiment is a metal torsion bar. With the aid of chucks, mass discs of varying inertia can be attached to the bar. It this way it is possible to assemble torsional vibrator systems with up to three masses. Vibrations can be induced on the system using an electrical exciter supplied from the control unit. An adjustable damper can be used to influence the vibrations. Shaft encoders on the chucks provide the amplitude of vibration as an electrical signal. The control unit conditions these signals and makes them available, e.g., for display on an oscilloscope (which must be provided) or on the PC data acquisition system TM 140.20 (available as an accessory).

Learning Objectives / Experiments

· Determination of the torsional stiffness of a torsion bar
· Determination of the mass moment of inertia
· Decay behaviour of torsional vibration
· Determination of the damping of torsional vibration
· Forced torsional vibration, resonance
· Torsional vibration systems with several weights, two mass torsional vibrator, three mass torsional vibrator

Features

Versatile table experiment system on torsional stiffness and torsional vibration
Behaviour of two and three masses torsional vibrators
PC data acquisition TM 140.20 available

Available accessories

TM 140.20 -- PC Data Acquisition System

Alternative products

TM 150.02 -- Free and Damped Torsional Vibrations
TM 163 -- Torsional Vibration Apparatus
TM 164 -- Vibration of Spiral Spring Apparatus
TM 610 -- Inertia in Rotational Motion Apparatus
TM 612 -- Flywheel Apparatus
TM 613 -- Comprehensive Flywheel Apparatus

Specification

[1] Unit for investigating torsional vibration and torsional stiffness in demonstrations and student experiments
[2] Base frame made of aluminium with rubber feet
[3] Steel torsion bar, corrosion-resistant, 1300mm, Æ6mm
[4] Mass discs Æ150mm and Æ228mm
[5] 4 ball bearing mounted bearing units with chucks and 3 hole flange, the bearing units can be positioned as required
[6] Sealed oil damper 0.25...3.5Nm/rad/s
[7] Exciter with drive crank, excitation amplitudes 1.4°, 1.8°, 2.4°, frequency 1...20Hz
[8] 4 electr. shaft encoders, 0.03V/°
[9] Electron. exciter control unit with digital frequency display, 10-turn potentiometer and supply for the shaft encoders, 230V, ~50Hz
[7] lxwxh 1400x410x400mm

Technical Data

Torsion test bar: 1300mm, Æ6mm,
corrosion-resistant steel
Stiffness: approx. 1.0Nm/rad/m
Weights:
Æ150mm, approx. 2.7kg
Æ228mm, approx. 4.8kg
Exciter frequency: 1...20Hz
Damping coefficient: 0.25...3.5 Nm/rad/s

Dimensions and Weight

l x w x h : 1400 x 410 x 400 mm
Weight : approx. 55 kg

Connections

230V, ~50Hz

Scope of Delivery

1 base frame,
4 bearing units,
1 torsion bar,
3 mass discs,
1 exciter,
1 rotary damper,
1 control unit,
1 instruction manual

Order Details

040.14000 TM 140 Torsional Vibration Apparatus