Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Flow in Pipes  |  HM 500  |  HM 500.07
HM 500.07 Pitot Tube Show data sheet (pdf file) Print page
Technical Description
The pitot tube measures the total pressure in a flowing fluid using a pitostatic tube. At the same time the static component is measured using a vertical tube. If both measuring tubes are connected to a differential pressure gauge, the dynamic pressure component is displayed on the gauge; this component is equivalent to the flow speed or flow rate. The measuring device is made of Plexiglas so that the measuring section can be viewed with ease.
Learning Objectives / Experiments
· Familiarisation with a pitot tube
· Flow rate measurement
· Preparation of a pressure loss curve
· Comparison with other flowmeters
Features
Determination of flow rate by measuring the dynamic pressure component in a flowing fluid
Specification
[1] Accessory for the HM 500 Flowmeter Test Stand
[2] Measuring device made of Plexiglass
[3] Connection to tube manometer
[4] Pressure loss measurement on the flowmeter using annular chambers
Technical Data
Operating position: vertical and horizontal
Measuring connections for tube manometer
Pipe connections DN 32
Operation with water
Dimensions and Weight
l x w x h: 820 x 200 x 210 mm
Weight : approx. 6 kg
Scope of Delivery
1 flowmeter, 1 instruction manual
Order Details
070.50007 HM 500.07 Pitot Tube
Print
© 2005 G.U.N.T. Gerätebau GmbH