Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 161  |  HM 161.34
HM 161.34 Ogee Weir with Manometer Board Show data sheet (pdf file) Print page
Technical Description
The Ogee weir is one of the fixed overflow weirs. The weir body has 8 pressure measuring holes so that the pressure along the back of the weir can be measured. The pressure measuring holes are connected to a manometer panel on the side of the weir. The HM 161.54 Base Plate is required for fastening the weir in the channel. Tubular seals inserted in slots on the weir body complete the experimental set-up.
Learning Objectives / Experiments
· Flow over an overflow weir
· Measurements of the pressure along the back of the weir

For exact measurement of water levels, the use of the HM 161.52 Level Gauge on the moving HM 161.59 Instrument Carriage is recommended.
Features
Overflow weir with manometer board for displaying the pressure characteristic
Specification
[1] Fixed overflow weir for fitting to the HM 161 Large Flow Channel
[2] Only for use with HM 161.54
[3] Weir body made of PVC,
lxwxh 800x590x555mm
[4] Weir body connected to manometer board
Technical Data
Manometer board
8 tubes
Measuring range: 800mmWC, graduations 1mm
Dimensions and Weight
lxwxh : 800 x 590 x 830 mm
Weight : approx. 20 kg
Scope of Delivery
1 weir, 1 set of accessories, 1 instruction manual
Order Details
070.16134 HM 161.34 Ogee Weir with Manometer Board
Print
© 2005 G.U.N.T. Gerätebau GmbH