G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

>	Fundamentals of Fluid Mechanics
>	Flow in Pipes
>	Turbomachine Demonstrators
>	Turbomachines
>	Fundamentals of Aerodynamics and Airflow
>	Hydrology and Hydraulic Engineering
>	Components in Piping Systems

Process Control and Process Engineering

Overviews

Products | Fluid Mechanics and Hydrology | Hydrology and Hydraulic Engineering | HM 161 | HM 161.45

HM 161.45

Culvert Fittings

Technical Description

The HM 161.45 Culvert Fittings consist of a PVC body that is equipped with 2 different pipe cross-sections: a semicircular and a rectangular shape. To make the channel body easy to handle on installation, the body is hollow. During the experiments, operation is possible with full flow through the cross-section (pipe flow) and partial flow through the cross-section.

Learning Objectives / Experiments

· Inlet losses in a pipe or bottom outlet
· Cross-section restrictions in open flumes
· Hydraulically good drain cross-sections
· Losses on outlet into air and under water

Features

Investigations on a culvert

Specification

[1] Unit for fitting to the HM 161 Large Flow Channel
[2] Channel body made of PVC;
lxwxh 2050x590x775mm
[3] Hollow channel body, with semicircular and rectangular cross-section
[4] Experiments on pipe flow or open flume flow

Technical Data

Semicircle: DN 315 (for full circle)
Rectangle wxh: 120x300mm

Dimensions and Weight

lxwxh : 2050 x 590 x 775 mm
Weight : approx. 30 kg

Scope of Delivery

1 set-up, 1 set of accessories, 1 instruction manual

Order Details

070.16145 HM 161.45 Culvert Fittings