Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Theory of Machines  |  TM 260  |  TM 260.03
TM 260.03 Experimental Module Pin on Disc Show data sheet (pdf file) Print page
Technical Description
Using the experimental module, friction forces between a vertical pin and rotating disc can be investigated. The unit is intended for use with the TM 260 Tribology Trainer Basic Module. The end of each pin specimen made of steel, aluminium or brass rubs against the rotating, hardened, ground steel disc. The contact pressure between the components can be varied using a lever with weights. The friction force is measured using a strain gauge force transducer in the bearing point of the loading mechanism. The disc is enclosed in an open container that can be filled with different lubricants for the experiments.
Learning Objectives / Experiments
· Friction forces for different pairs of friction materials and load
· Friction forces with different lubrication
· Friction forces at different relative speeds of the components
· Wear for different friction parameters
Features
Investigations on wear on different pairs of friction materials with point contact
Specification
[1] Table exp. module for the investigation of wear on pairs of friction materials with surface contact
[2] Operation in conjunction with TM 260 module
[3] Stainl. steel friction disc, hardened and ground
[4] Operating speed 0...0.42ms¯¹
[5] Pin material steel, aluminium, brass
[6] Friction pin diameter 4mm
[7] Force measuring using full bridge strain gauge, 0..50N
Technical Data
Friction disc: stainless steel, hardened, ground
Operating speed: 0...0.42ms¯¹
Friction pin diameter: 4mm
Load: 0...80N
Load measuring range: 0...50N
Dimensions and Weight
l x w x h : 350 x 440 x 230 mm
Weight : approx. 8 kg
Scope of Delivery
1 experimental module, complete,
1 instruction manual
Order Details
040.26003 TM 260.03 Experimental Module Pin on Disc
Print
© 2005 G.U.N.T. Gerätebau GmbH